FCC mod : 1. start drone and DJI GO 4 (4.0.6, 4.0.4, 4.0.3 ) 2. disconnect internet 3. go to DJI GO 4 on tab About 4. tap to Flight Controller 11 times 5. to a first string, input password - djitestcc 6. second string - US 7. third string leave 8. OK button 9. enjoy! Mod works till you restart application ... See more
ATTENTION!!! - 4.0.6 and 4.0.3 DJI GO versions are recommended. - Please avoid connecting to Internet when DJI Go is active - If DJI Go forces Update: * close DJI go * reinstall DJI Go 4.0.6 or 4.0.3 * don't connect to Internet while DJI Go is opened or use firewall application to block DJI GO request. - DJI now allows downgrade only to 800 and 900 versions ... See more
Phantom 4 PRO 602 firmware is supported
Attention. We got information that new restrictions could be added. We'll keep you informed. Meanwhile - Avoid using 800 and 900 firmware versions during a week. - Downgrade DJI Go to spring 2017 versions - Avoid connecting your drone, DJI Go and remote to Internet I hope we'll know in a week what they are going to do. ... See more
AUTOLANDING What is autolanding? Autolanding is forced when you enter red battery level at top of DJI Go screen. It will go down with default speed, that is much slower than Sport+. You can't control down speed in that case. How to avoid Autolanding. Flight time is calculated based on drone current. Therefore, if your battery level is near RED ZONE you need to slow down vertical up speed or even go down for some time. It will recalculate remaining flight time. ------------ Some users report that you can increase down speed during autolanding using throttle stick ... See more
900 and 800 Mavic firmware versions are now supported. NFZ option is available only in 400 and 700
We added FAQ. It will be updated daily. https://www.coptersafe.com/faq/
FLY ACCORDING TO YOU LOCAL LAW. Mod removes limitation from your device, but actual flight is your own responsibility and risk.
Problem with Windows 10 is fixed!
Sky is not the limit.
https://www.youtube.com/watch?v=vDHeDM5kiTA
Showing off the 2 mods by CopterSafe. On firmware 700, though support for 400 has just come out.
Atti mod for Mavic in action from beta tester. We'll be released soon
https://www.instagram.com/p/BUWkNQSBwXy/ INSPIRE 2 shooting at Tallinn airport with coptersafe mod
47 Likes, 3 Comments - Jaan Kronberg (@skycam_ee) on Instagram: “#tallinnairport is refreshing some of it's landing stripes, but airports never sleep 🙂 @airbaltic…”
https://www.youtube.com/watch?v=JupRdle3jrI
New mod that removes attitude limitation from https://www.coptersafe.com
https://www.coptersafe.com/product/nfz-mod-for-phantom-4-proadv/
NFZ mod for Phantom 4 Pro/Adv removes No Fly Zone (NFZ) limitation in Phantom 4 PRO and Advanced drones. With mod installed you can fly it in NFZ areas as usual. All functions could be used: GPS positioning Return To Home Waypoints and intelligent flight modes How to install You don't need to wait f... ... See more
http://www.phantompilots.com/threads/no-fly-zones-problem.101933/
Hi. Sometimes we receive orders for flights in the NFZ with DJI Phantom 3pro. I searched the net for a long time and found the guys given the solution....
New product for FLIR thermal camera https://www.youtube.com/watch?v=ilWjdX7k-tE
Lightweight camera mount with HD video downlink for FLIR thermal camera - Transmits realtime HD-quality video on your remote - Easy 1 minute installation (re...
https://www.youtube.com/watch?v=9lXLAlc-RWE
Is CopterSafe real??? https://www.reddit.com/r/djiphantom/comments/5a2spj/turns_out_coptersafecom_is_legit_they_showed_up/
1 points and 10 comments so far on reddit
